Leaky Faucet

How to Fix a Leaky Faucet

Fix your faucet now

Among the many items you’ll attend to as you’re preparing your home for the winter, which will arrive in full force––someday––is a faucet. The condition of this is dependent on how you’ve cared for it so far, but if you have any concern for its condition right now, you shouldn’t wait any longer: set about fixing it or call a plumber and leave it for an expert. If you’re in a minor fix, however, and need one––follow along and we’ll indicate a few tips for the time being.


What you’ll need

Items you’ll need along the way:

-white vinegar

-plumber’s grease

-a wrench

-various screwdrivers

-a replacement kit or any parts you’re getting rid of


Shut off your faucet

First of all, shut off your faucet. Don’t just switch off the lever, but actually prevent water from flowing in. Do this by looking underneath the sink you’re addressing, where you’ll find another lever or handle on one of the pipes. It’s worth mentioning the kind of repair you need will vary depending on whether the leak is occuring in the end of the spout or earlier on. Moreover, there are a few different kinds of single-lever faucets as well as a two-lever version.


Identify any water valves

We’ll go through the measures you will need to apply no matter which kind of faucet you’re dealing with. If, in turning off the valve underneath a sink, you find the water is unaffected or else there is no valve in the first place, locate your main water valve. The location of the main water valve will change if you are living in an apartment, a suburban or even a rural location. The valve may be in a basement, near the street, or nowhere altogether.


Get rid of excess water pressure

In fact, if you live in an apartment, the valve may be elsewhere entirely. You may need to request a cease of water flow from the handyman or whoever is in charge. Once you’ve prevented the water from flowing, turn on the faucet––not the water––again in order to be sure there’s no more water emerging as well as dispensing of any water pressure. There are many conceivable causes for a leak, including defective sealing, buildup, and corroded or loose parts.


Close your drain

The next step, before maintenance, is closing off your drain. Use either a sink plug or a cloth or rag of some nature. This is primary in the interest of avoiding a loose metal piece like a nut, screw, washer, or bolt falling into a drain. This kind of detour will make a lot of extra work and prevent you from getting at the things you really need better. You’ll need a wrench: tape it so you avoid scratching anything. Lay out a surface for placing any removable components.


Which faucet are you using?

Figure out which faucet you have. There are four in all, including a compression faucet (two handles), a ball faucet, a cartridge faucet, and a ceramic-disk faucet. Rather than attempting an elaborate description, merely search for each of these online so you can see for yourself which resembles the thing in front of you. Be aware of the order in which you remove anything and even consider recording your progress or any mistakes along the way.


Compression faucet

For a compression faucet, remove each of the handles and their decorative caps. Remove the packing nut underneath using your wrench. You will see a valve stem, which you unscrew. If the seat washer is in bad condition, replace it. Remove the O-ring and place a new one as the O-ring is a frequent reason for these issues. Be sure you select the correct size O-ring. If you notice the leak is emanating from the handles, the O-ring may be the origin.


Ball faucet

For a ball faucet, you’re going to need a bunch of replacement pieces. Furthermore, the number of pieces will render the identification of the leak a more complicated process. You can buy an entire replacement kit. The kit will make the entire solution easier. Unscrew the handle and move it aside. With a set of pliers, take off the cap and collar. Loosen the faucet cam and take the washer and ball. Take out the inlet seals and springs with your pliers. Remove the O-rings and cover the new ones in plumber’s grease. Reassemble everything else with new pieces out of the kit.


Cartridge faucet

For a cartridge faucet, begin by once again removing the decorative cap if you find one. Take off the screw holding in the handle and then take off the handle, too. If you discover a retaining clip, use pliers to get it off. Pull off the cartridge and spout. Go through the same process as before with the O-rings: remove the old ones and, after applying plumber’s grease, affix the new ones. Place all the pieces as they were originally.


Ceramic-disk faucet

Finally, for a ceramic-disk faucet, displace the handle so you can get at the escutcheon cap. Take off the escutcheon cap and remove the disk cylinder. Remove the seals and clean off the cylinder. Apply new seals if the old ones are in bad condition. Clean everything. Put everything back together, including any replacement pieces, and gently readminister the water flow. Be sure you’re careful with your water, as a sudden increase in pressure can damage some of the components of your faucet.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *